Wireless Three Phase Class 2100 Meters

Wireless Three Phase Class 2100 Meters

  • Direct-read 8-digit LCD display without multiplier displays accumulative kWh and "real-time" kW load.
  • Meter has built-in wireless transceiver for in-building remote meter data collection and can interface with E-Mon wireless gateways to automatically compile data in PC-based E-Mon metering software.
  • Fully self-configuring wireless mesh network allows for easy installation and configuration with no network management required.
  • Demand option displays kW/Demand and kW Peak date and time (15 minute interval standard, 30 minute interval available.)
  • NEMA 4X outdoor enclosure with 1 1/16” KO (3/4” cond.) on bottom of enclosure.
  • Non-volatile Memory
  • Utility Grade Metering Accuracy. Certified to ANSI C12.1 and C12.16 electronic meter National Accuracy Standards. (+/- 1% from 1%-100% of the rated load.)
  • Wireless transceiver is FCC certified not to interfere with existing infrastructure.
  • Wireless mesh network operates in the 915 MHz frequency hopping spread-spectrum license-free band. No cellular wireless service contracts are required.
  • Meters with built-in wireless transceivers can be mounted inside buildings within approximately 500 feet line-of-sight from each other and up to 200 feet through walls, depending on wall material.
  • 0-2 volt output split-core current sensors promote enhanced safety and accurate remote mounting of current sensors up to 2000 feet from meter without power interruption. (Optional solid-core sensors available.)
  • Meters are equipped with a current sensor diagnostics indicator to assist in installation.
  • Parallel up to three (3) sets of current sensors for cumulative reading.
  • Meter can be used on the following configurations:
    • 3-Phase, 4-Wire
    • 3-Phase, 3-Wire
    • 2-Phase, 3-Wire
For other configurations contact factory.

120/208-240V, 3-Phase, 4W 240V, 3-Phase, 3W
  • 208100RWT KIT (100 amp)
  • 208200RWT KIT (200 amp)
  • 208400RWT KIT (400 amp)
  • 208800RWT KIT (800 amp)
  • 2081600RWT KIT (1600 amp)
  • 2083200RWT KIT (3200 amp)
277/480V, 3-Phase, 4W 480V, 3-Phase, 3W
  • 480100RWT KIT (100 amp)
  • 480200RWT KIT (200 amp)
  • 480400RWT KIT (400 amp)
  • 480800RWT KIT (800 amp)
  • 4801600RWT KIT (1600 amp)
  • 4803200RWT KIT (3200 amp)

NOTE: All meter kits include one set of three (3) split-core current sensors

For demand option add suffix “D” to the model number. e.g., 208400RWTD KIT